Subscribe & Support This Site!
consumer hair removal forum
Page 1 of 2 1 2 >
Topic Options
Rate This Topic
Hop To:
#124371 - 07/24/17 06:35 PM hairs break off during treatment
fenix Offline
Top 10 Contributor

Registered: 03/17/12
Posts: 524
When I'm treating hairs with galvanic, some hairs tend to break off at the follicle opening when I try to remove it and so the lower part of hair remains with the bulb and sheath in the follicle. My vision aid is pretty good and I'm confident in my insertions accuracy because I can actually see the tip of the needle right at the correct length reaching the hair bulbs.
I don't pull hard on these hairs, and I can't blame it on resistance from lack of proper energy delivery.

Is this something that requires a correction in my technique or do hairs just break off occasionally?


Edited by fenix (07/24/17 06:37 PM)

Top
Sponsored Links
#124372 - 07/25/17 06:08 AM Re: hairs break off during treatment [Re: fenix]
beate_r Offline

Top 10 Contributor

Registered: 07/25/05
Posts: 900
Loc: Hattersheim, Germany
Why should You? The hairs would be pushed out by the healing process; they are dead tissue and only need to be removed by us because we would not see the progress otherwise. Please keep in mind that the laser people also leave the hairs they kill in the skin (if they killed any, but so some degree they do...)

I would notify the client, because that might imply a slightly stronger healing reaction.

BTW: it happens with all methods. And it might be an indicator that it is possible to slightly reduce the energy.
_________________________
Beate Ritzert

Elektroepilation Dr. Beate Ritzert
http://epi.ritzert.net/en/

Top
#124373 - 07/25/17 09:57 AM Re: hairs break off during treatment [Re: fenix]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1549
In Fenix's case I believe fenix is their own client, so I'm certain the client wont complain smile
Are the other hairs sliding out with no resistance? If it's one hair I wouldn't worry about it, one either the hair didn't die ( and will grow out of the follicle in a day or so or alternatively it will shed on its own like a tombstone does if the follicle has been killed. As long as its only one or two hairs, we dont worry about it and we'll get em next time. If you aren't getting smooth extractions from several hairs, its time to re-evaluate your technique and energy levels.

Seana


Edited by Iluv2zap (07/25/17 09:59 AM)
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#124377 - 07/25/17 09:47 PM Re: hairs break off during treatment [Re: fenix]
fenix Offline
Top 10 Contributor

Registered: 03/17/12
Posts: 524
It's happening more than I want to see it. Since it's scrotal skin, keeping it flat is difficult. I'm not sure if it's related to energy levels because I don't think I'm under treating.
I'm working with 10 tenths/1mA 20 seconds in straight galvanic. Before I with 3 tenths with up to 60 seconds. I don't think my insertions are way off at all, but sometimes I do "lift' a follicle wall a bit with the needle, since it's hard to keep skin flat.


Edited by fenix (07/25/17 09:47 PM)

Top
#124380 - 07/26/17 12:22 PM Re: hairs break off during treatment [Re: fenix]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1549
if it's resisting enough to break the hair when you try and take it out, its not dead yet. I would try venturing beyond pure galvanic to blend.You might also wish to try a "treat and wait" strategy, treat little groups of 5 or so hairs, then another group, then another, When you have dont the third grouping remove the first ones. You'll likely find that they release much better ( with no breakage). Lye is a chemical reaction, therefore not as "instant" as thermolysis aided modalities so letting the lye work ing he follicle for a minute or two will help immensely.

Seana
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#124381 - 07/26/17 12:40 PM Re: hairs break off during treatment [Re: fenix]
Deedra Offline

Top 10 Contributor

Registered: 08/02/18
Posts: 9726
Loc: United States
I agree with Seana. When I did multi-needle galvanic, waiting to remove the hair in a few minutes was very helpful. Breakage is bad news.
_________________________
Dee Fahey RN CT LLC

Licensed by the State Medical Board of Ohio for Cosmetic Therapy/Electrolysis and the State Nursing Board of Ohio

Top
#124382 - 07/26/17 02:37 PM Re: hairs break off during treatment [Re: fenix]
dimi Offline
Major Contributor

Registered: 02/14/17
Posts: 135
Loc: Montreal, Canada
fenix,

I understand that your setting is 1mA for 20 sec. This is 200UL.
Hmmm...there is something wrong here.

Top
#124383 - 07/26/17 05:08 PM Re: hairs break off during treatment [Re: fenix]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1549
how is your insertion accuracy on these insertions? Working on yourself, it cant be great. Any possibility you were in the wrong follicle?


Edited by Iluv2zap (07/26/17 05:09 PM)
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#124384 - 07/26/17 07:51 PM Re: hairs break off during treatment [Re: fenix]
fenix Offline
Top 10 Contributor

Registered: 03/17/12
Posts: 524
I'm confident in insertion accuracy for the most part because of high magnification. Plus the follicles on scrotal skin are so close to the thin epidermis that I can actually see the hair bulb and the needle reaching it. But there are areas of the scrotum where it's very difficult to guess at which angle the follicle is because the probe can be placed parallel to the skin or at an angle and it feels like the follicle just dances around with the skin.

What I suspect is happening: high galvanic dissolving the hair where it breaks off because the root sheaths are so fat that they resist from passing through the narrower follicle openings?

During the next treatment I will wait and allow the lye to work longer as you advise to see if that helps release them without breaking.

Top
#124385 - 07/26/17 07:56 PM Re: hairs break off during treatment [Re: dimi]
fenix Offline
Top 10 Contributor

Registered: 03/17/12
Posts: 524
Originally Posted By dimi
fenix,
I understand that your setting is 1mA for 20 sec. This is 200UL.
Hmmm...there is something wrong here.


I wish I had better literature on single needle/ straight galvanic. But 200UL sounds OMG when I think it's appropriate levels for DC alone. 200UL with Blend would be in the over-treatment zone because AC would be in high levels.

Top
Page 1 of 2 1 2 >

Moderator:  Andrea 
Sponsored Links
Recent Posts
Pro-Tec Probes Recommendations for Apilus
by Iluv2zap
10/20/18 08:30 PM
Unwanted hair - help/advice!
by EUGuy
10/20/18 04:27 PM
PCOS over-diagnosed
by Michael Bono
10/20/18 04:19 PM
Apilus Platinum Pur for Sale
by laraisk
10/19/18 09:14 AM
Something wrong
by blueberry
10/18/18 09:11 PM
Top Posters
LAgirl 9994
Deedra 9726
James W. Walker VII 8055
Andrea 4158
Michael Bono 3515
Who's Online
0 registered (), 121 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod