Subscribe & Support This Site!
consumer hair removal forum
Topic Options
Rate This Topic
Hop To:
#127242 - 07/19/18 08:24 PM Pls help: What is/are settings for curly follicle?
melb_aussie Offline
Major Contributor

Registered: 02/04/16
Posts: 85
Loc: Upwey, VIC Australia
Can anyone please help advise regarding treating super bulky inner root sheath & curly follicles of thick diameter hair?

A male client with mix of straight & curly follicles => Using Clareblend for treating thick straight hair took around 1-2 sec or less per each follicle.

But it took too long to treat bend follicles (It took me 2-4 sec or longer per each follicle).

Can either Instantron or Apilus treat BEND follicle faster? What is/are your recommended settings to be able to release bend follicle less than 1-2 sec?

[img:center]https://www.facebook.com/photo.php?fbid=...eater&ifg=1[/img]

Thank u in advance,
Nora


Edited by melb_aussie (07/19/18 08:25 PM)
_________________________
Please visit my websites:
Facebook I: Upwey Electrolysis => https://www.facebook.com/ElectrolysisUpwey/

Facebook II: Upwey Laser => https://www.facebook.com/upweylaser/

Top
Thread Sponsors
#127243 - 07/19/18 08:30 PM Re: Pls help: What is/are settings for curly follicle? [Re: melb_aussie]
melb_aussie Offline
Major Contributor

Registered: 02/04/16
Posts: 85
Loc: Upwey, VIC Australia
_________________________
Please visit my websites:
Facebook I: Upwey Electrolysis => https://www.facebook.com/ElectrolysisUpwey/

Facebook II: Upwey Laser => https://www.facebook.com/upweylaser/

Top
#127245 - 07/20/18 01:13 AM Re: Pls help: What is/are settings for curly follicle? [Re: melb_aussie]
melb_aussie Offline
Major Contributor

Registered: 02/04/16
Posts: 85
Loc: Upwey, VIC Australia
Please let me rewording my question.

Can anyone please help advise regarding treating super bulky inner root sheath of curly follicles of thick diameter hair?

I am having a male client with mix of straight & curly follicles. Using Clareblend for treating thick straight hair took me only around 1-2 sec or less per each follicle. So no problem for this.

But it took too long for me to treat bend/curvy follicles (each follicle with curvy hair underneath the skin took me around 3-4 seconds or longer).

Can either Instantron or Apilus treat curvy follicle faster? What is/are your recommended settings of such machines in order to be able to release these bend follicles of thick hair with super bulky inner root sheath for less than 1-2 sec?
_________________________
Please visit my websites:
Facebook I: Upwey Electrolysis => https://www.facebook.com/ElectrolysisUpwey/

Facebook II: Upwey Laser => https://www.facebook.com/upweylaser/

Top
#127247 - 07/20/18 08:15 AM Re: Pls help: What is/are settings for curly follicle? [Re: melb_aussie]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1510
Nora:
have a look at this link, it might tell give you some of what you seek:
http://electrolysisinfo.board-directory.net/t5-fast-blend
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#127248 - 07/20/18 08:51 AM Re: Pls help: What is/are settings for curly follicle? [Re: melb_aussie]
melb_aussie Offline
Major Contributor

Registered: 02/04/16
Posts: 85
Loc: Upwey, VIC Australia
Thank u Seana. I'll read it now.

In the meantime, I just want to clarify my question again that:

I'm very flexible with the type of the energy I need to use. I do not mind if it is blend or just thermolysis alone as long as the stubborn hairs can b released within 1-2 sec per follicle. Give & take together with my electrolysis skill errors, I aim to permanently remove all BODY hairs within 4 clearances (not sessions).

Again, can anyone please help advise whether Instantron or Apilus treat curvy follicle faster? What is/are your recommended settings to be able to release these curvy follicles of thick hair with super bulky inner root sheath for less than 1-2 sec?

Thank u for very supportive community here I always received from this forum.
_________________________
Please visit my websites:
Facebook I: Upwey Electrolysis => https://www.facebook.com/ElectrolysisUpwey/

Facebook II: Upwey Laser => https://www.facebook.com/upweylaser/

Top
#127251 - 07/20/18 11:50 AM Re: Pls help: What is/are settings for curly follicle? [Re: melb_aussie]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1510
It had little to do with the energy of the machine. You use the same settings whether the follicle is curved or strait, your insertion technique however may vary.

Picturing the hair follicle and probe like a foot being put into a sock, could/should be helpful here.

This is to say, varying the energy output of your machine is NOT a good solution to inaccurate insertions, whatever the cause the objective is the same, to have the exposed part of the probe in near as direct contact with the areas one needs affected ( the bulge) as possible.While certainly proximity to target is more applicable to thermolysis, it still has an effect regardless of modality.

You should take this discussion back to Electrology International, I'm not at all sure I want consumers misinterpreting statements on such a highly technical discussion of electrology.


Edited by Iluv2zap (07/20/18 11:57 AM)
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top

Moderator:  Andrea 
Sponsored Links
Recent Posts
Apilus Senior 13 Mhz for DIY?
by blueberry
Yesterday at 08:36 PM
New Hinkel video/tape 5-minutes
by melb_aussie
Yesterday at 11:54 AM
Electrologists in India
by HairByHair
Yesterday at 08:34 AM
Suggestions on my case and DIY info
by Iluv2zap
08/18/18 02:12 PM
Whirlpool Forums immediately delete my posts
by Deedra
08/17/18 11:49 AM
Top Posters
LAgirl 9994
Deedra 9702
James W. Walker VII 8055
Andrea 4157
Michael Bono 3466
Who's Online
0 registered (), 131 Guests and 5 Spiders online.
Key: Admin, Global Mod, Mod