Subscribe & Support This Site!
consumer hair removal forum
Topic Options
Rate This Topic
Hop To:
#43176 - 06/24/07 09:54 PM Need some advice on electrolysis
PersianGorilla Offline
Member

Registered: 06/24/07
Posts: 6
I've recently purchased the one touch unit and cleared about 30+ hairs on my arm and a few other test spots. I have a few questions...

1) I've been able to pull the hair out with relative ease on a setting of 2 on the unit with 10-15 seconds of treament. Is it possible that I'm not treating it high enough or is the fact that the hair is sliding out without ripping it out enough of an indication of adequate treatment?

2) There are multiple small scabs that form one day after treatment. Is this acceptable or does this mean I'm not treating correctly or too close to the skin? I've read all the threads on aloe vera and tea tree oil so I'll probably give those a shot.

3) I bought all of the parts to construct the homemade unit suggested on the geocities website with the professional probes. I also picked up a pair of 4.00x reading glasses off eBay to help a little with the vision. These items will all arrive shortly. I will mostly be treating my upper arms, chest, abs and upper waistline. I have had multiple (10+) laser treatments and hope to help out the treatments with home electrolysis. Assuming I become fairly quick with my insertions, how many hairs can I realistically treat per hour? I know it is very user-dependent, setting-dependent and area-dependent. But, given that I am treating for about 15 seconds on average, would 100 hairs per hour be an unlikely goal?

4) What kind of efficacy can I expect using these galvanic devices (assuming I treat and insert properly)?? 50% permanent clearance on the first treatment?

Thanks in advance!

Top
Sponsored Links
#43179 - 06/25/07 01:18 AM Re: Need some advice on electrolysis [Re: PersianGorilla]
Marthajoy Offline
HairTell Pro
Top 20 Contributor

Registered: 05/27/06
Posts: 237
Loc: WASHINGTON
PersiainGorilla;
The probe size with the One Touch I believe is about a size 10.
You are probably having difficulty getting the probe to even go into the hair follicles. It is my opinion however that 10 to 15 seconds is too fast for Galvanic to properly decompose the papilla of the hair. I would shoot for a setting of at least 30 seconds.
Scabs are an indication of overtreatment, which can quickly happen if treating many hairs that are very close to each other. I would very much recommend that you get a good book that covers Electroysis before doing much more to your body.
I am also somewhat concerned as to whether your hair follicles have enough moisture. That is because clients that I have treated always seem to come to me dehydrated. If you just pluck a hair does it have a moisture sheath along the shaft of the hair. You may need to use a good moisturizer and increase your hydration,, as galvanic works entirely by converting moisture into Lye which is what decomposes the hair.
With galvanic you generally do not need insulated probes, but if you are having scabs form it could be that the follicle is so dry that the path of least resistance is at the surface of the skin. If that is the case, you are not killing the hairs at all.
Also galvanic requires that the hair be in the Anagen stage, (actively growing stage).
I would suggust that you concern most of all with correct procedures and not rate of speed. The probe diameter should be about the same diameter as the hair shaft. Professional Probes are based on their diameter. Size 2 is 0.002 whereas a size 4 would be 0.004 an so on. So in this case the larger the number, the larger the probe. If you skin is very conductive, you may want to consider using an insulated probe, to cut done the conductivity at the skin surface. What is important is to have the bare portion of the probe at a depth where there is abundant moisture to convert to lye.
I hope this helps.
_________________________
Martha Montgomery, CCE
Puget Sound Electrology

Top

Moderator:  Andrea 
Sponsored Links
Recent Posts
Advice: Should I switch to someone who uses blend?
by endlesshello
1 second ago
A Tale of Two Electrolygists
by Iluv2zap
Today at 10:38 AM
Thermocoagulation and Health Canada regulation
by Iluv2zap
01/15/18 11:09 PM
One month on...
by Iluv2zap
01/15/18 11:00 PM
Sterilization in Canada
by Iluv2zap
01/15/18 10:55 PM
Top Posters
LAgirl 9994
dfahey 9633
James W. Walker VII 8052
Andrea 4149
Michael Bono 3220
Who's Online
0 registered (), 50 Guests and 4 Spiders online.
Key: Admin, Global Mod, Mod