Subscribe & Support This Site!
consumer hair removal forum
Page 3 of 5 < 1 2 3 4 5 >
Topic Options
Rate This Topic
Hop to:
#57090 - 10/27/08 09:00 AM Re: Nd:YAG HR and PSF Methode [Re: putrikalimantan]
putrikalimantan Offline
Contributor

Registered: 09/28/08
Posts: 40
I went to my second treatment today (upper lips hair, coarse and dark, look like men's moustache except they are sparse). Skin type IV. Using Yag machine with setting:
Power: 24 Joule/cm2 (first treatment was 22 Joule)
Pulse length: 5
Spot: 15
Is that good setting for my skin type and the area (upper lips)? Thank you!!!!

Top
Sponsored Links
#57091 - 10/27/08 09:43 AM Re: Nd:YAG HR and PSF Methode [Re: putrikalimantan]
putrikalimantan Offline
Contributor

Registered: 09/28/08
Posts: 40
Oh and this time, they did not use PSF on me.

Top
#57096 - 10/27/08 10:52 AM Re: Nd:YAG HR and PSF Methode [Re: putrikalimantan]
Romeo Offline

Major Contributor

Registered: 06/19/06
Posts: 121
Loc: New York, USA
If it is Gentleyag or Gentlemax ( YAG side ) , it is a safe setting. I would probably go higher.
_________________________
Chris Karavolas
Romeo & Juliette Laser Hair Removal
New York, N.Y.
212-750-2000

Top
#57097 - 10/27/08 10:57 AM Re: Nd:YAG HR and PSF Methode [Re: Romeo]
putrikalimantan Offline
Contributor

Registered: 09/28/08
Posts: 40
Hm... Romeo, not sure if I can tolerate higher setting. I hurt soo much that every zap I had to take a few seconds to breath, lol.

Top
#57098 - 10/27/08 11:42 AM Re: Nd:YAG HR and PSF Methode [Re: putrikalimantan]
lagirl Offline
Top 10 Contributor

Registered: 12/22/04
Posts: 5409
Loc: Los Angeles, CA
Pain shouldn't be your consideration if you want results. If you can't handle it, use a numbing cream. Using lower settings only due to not being able to handle the pain is not a good idea if you want the most for your money.

The pulse and spot size are fine, but the joules are somewhat low for a Yag.

Top
#57101 - 10/27/08 11:55 AM Re: Nd:YAG HR and PSF Methode [Re: lagirl]
putrikalimantan Offline
Contributor

Registered: 09/28/08
Posts: 40
Thanks LaGirl! I will try numbing cream next time. How high the joules would you recommend?

Top
#57103 - 10/27/08 11:57 AM Re: Nd:YAG HR and PSF Methode [Re: putrikalimantan]
putrikalimantan Offline
Contributor

Registered: 09/28/08
Posts: 40
I forgot to say, they use GentleYag in the clinic.

Top
#57106 - 10/27/08 11:59 AM Re: Nd:YAG HR and PSF Methode [Re: putrikalimantan]
lagirl Offline
Top 10 Contributor

Registered: 12/22/04
Posts: 5409
Loc: Los Angeles, CA
On 15mm, the max is 40J. See how high you can handle. We can't tell over the Internet. They have to do some test spots.

Top
#57107 - 10/27/08 12:03 PM Re: Nd:YAG HR and PSF Methode [Re: lagirl]
dfahey Offline
Top 10 Contributor

Registered: 10/27/03
Posts: 3710
Loc: Columbus, Ohio
A skilled electrologist, using the best equipment could have handle this with less skin reaction and discomfort in a very timely manner. Thanks for the picture.
_________________________
Dee Fahey, R.N., C.T.
Licensed by the State Medical Board of Ohio for Nursing license and Cosmetic Therapy/Electrolysis license

Top
#57109 - 10/27/08 12:10 PM Re: Nd:YAG HR and PSF Methode [Re: dfahey]
putrikalimantan Offline
Contributor

Registered: 09/28/08
Posts: 40
Thank you Lagirl! I will ask them to rise the joules next time. Dfahey, electrolysis was my first choice but unfortunately after some research, there's no electrologist here in Germany.

Top
Page 3 of 5 < 1 2 3 4 5 >


Recent Posts
What is true about hair??????
by VickieCNY
0 seconds ago
Pay rate for electrologist's working for employer
by CareBearhair
6 minutes 13 seconds ago
Would laser be right for me?Male with darkish skin
by James W. Walker VII, CPE
Today at 09:02 AM
Recommended read for beginers please
by James W. Walker VII, CPE
Today at 08:57 AM
Looking to do it at home
by James W. Walker VII, CPE
Yesterday at 07:37 PM
Top Posters
lagirl 5409
James W. Walker VII, CPE 4888
Andrea 3926
dfahey 3709
RJC2001 1513
Who's Online
3 Registered (CareBearhair, slipslop, VickieCNY), 18 Guests and 2 Spiders online.
Key: Admin, Global Mod, Mod