Subscribe & Support This Site!
consumer hair removal forum
Topic Options
Rate This Topic
Hop To:
#125095 - 11/09/17 01:39 AM Need help purchasing an electrolysis machine
Ruz Offline
Member

Registered: 03/02/16
Posts: 3
Hello everyone,

Thanks for taking the time to read this message.
It has been a while I am doing some research about electrology profession but at this moment I am thinking to buy a machine ,not too expensive , just for the sake of practice and see how I am going to like it. Any suggestion where I can buy a used machine? Has anybody ever bought anything from Texas electrolysis supply website?
Is there any similar supplier in Canada?

Thank you All
Ruz

Top
Thread Sponsors
#125101 - 11/09/17 09:52 AM Re: Need help purchasing an electrolysis machine [Re: Ruz]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1124
beware the apilus Senior for sale for $100 in ontario by "herb" in westport. This person tried to pull a bait and switch on me yesterday. Kijiji is often a good place to look in canada for used machines.


Edited by Iluv2zap (11/09/17 10:00 AM)
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#125102 - 11/09/17 11:31 AM Re: Need help purchasing an electrolysis machine [Re: Ruz]
dimi Offline
Major Contributor

Registered: 02/14/17
Posts: 60
Loc: Montreal, Canada

Apilus electrolysis machines in Kijiji:

https://www.kijiji.ca/b-quebec/apilus/k0l9001?dc=true

Top
#125103 - 11/09/17 12:30 PM Re: Need help purchasing an electrolysis machine [Re: Ruz]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1124
yup. and thats exactly how you look for the,. Keep in mind that is for a quebec wide search and that you will likely have to speak french, to strike a deal with someone. Also the usual craigslist/ kijiji scam warnings apply. Watch out for bait and switch, always deal in person and in cash, check everything out thoroughly before you buy it. Ontario usually has a few as well. Good search terms for quebec" Apilus Sillouette Tone, VMC , Electrolyse . In ontario electrolysis Apilus VMC FIsher Silouette Tone.


Edited by Iluv2zap (11/09/17 12:32 PM)
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#125109 - 11/09/17 05:28 PM Re: Need help purchasing an electrolysis machine [Re: Ruz]
Ruz Offline
Member

Registered: 03/02/16
Posts: 3
Hi Seana and Dimi,
Thank you so much for your response.
I usually check Kijiji to see if I can find something around me (I live in Vancouver suburb) then I can see the device in person so I can pay in person as well. but I haven't seen anything come up around me. as you mentioned, most of them are sold in Quebec or Ontario.
is there any legit supplier that they sell used one with reasonable price?
what is the least expensive new unit that I can purchase?

thanks
Ruz

Top
#125116 - 11/10/17 12:33 PM Re: Need help purchasing an electrolysis machine [Re: Ruz]
Iluv2zap Offline
Top 10 Contributor

Registered: 11/19/14
Posts: 1124
Texas Electrolysis Supply is legitimate. They are having trouble with their phone system right now so are asking people to call their local number not the 800 number.
Dectro and Silouette Tone both require your electrologist certificate as best I know. Dectro may not care, but they still ask for quite a bit for used machines. In the " a few hundred bucks " range the only places you find them are kijiji or the odd time craigslist or ebay. The problem I see with ebay, its a sellers market and machines get bid up to crazy prices.

The downfall for kijiji is severalfold. First, it's designed to facilitate face to face transactions. There is no opportunity for you to inspect the property if you are having someone ship something and no guarantees on the product if it doesnt work correctly. While it is possible to interact with sellers in other provinces and have them mail you the goods, this also leaves you open to various scams that can take place on kijiji. In short if you send money somewhere there is no guarantee you will recieve something useful to you in return. So while it's possible to email ( in french) someone in quebec to buy a machine from them and have it shipped to you, it's unlikely they are going to take anything non-guaranteed for payment, no credit cards, cash, or certified money order , and even then, you could end up with someones broken crap.

Electrology isnt a big enough medium to have a glut of available machines ( that someone paid several thousand dollars for at some point) that there are any dealers in used machines here in canada.

You're correct there is nothing listed in BC, but I did find this ST250 in calgary which moght be helpful for you:
https://www.kijiji.ca/v-electronics/calg...gationFlag=true

Seana
_________________________
Seana Richmond
Certified Electrologist.
Electrolysis By Seana
http://electrolysisbyseana.com

Top
#125117 - 11/10/17 12:55 PM Re: Need help purchasing an electrolysis machine [Re: Ruz]
dimi Offline
Major Contributor

Registered: 02/14/17
Posts: 60
Loc: Montreal, Canada
Seana is right,

Dectro will not sell electrolysis equipment without certification(not even probes).
It has to be considered also that if you buy used machine, you have to send it to legit service to verify it and calibrate.
Without certification will be more difficult to buy the accessories like probeholders, probes etc.

Top
#125121 - 11/10/17 10:58 PM Re: Need help purchasing an electrolysis machine [Re: Ruz]
Ruz Offline
Member

Registered: 03/02/16
Posts: 3
Hi guys,

I really appreciate your responses, I think my best bet is to keep an eye on kijiji or Craigslist and see what comes up.

How often do you calibrate your machines? Do you send them to the manufacturer ?

Top
#125182 - 11/13/17 11:54 AM Re: Need help purchasing an electrolysis machine [Re: Ruz]
James W. Walker VII Offline

Top 10 Contributor

Registered: 06/03/02
Posts: 8047
Loc: Buffalo NY, & Traveling the US...
Remember, these machines are a lot like a home theater stereo system. They don't usually need maintenance, and when they do, it is typically minor.

Some people never have their machines recalibrated.
I typically sent mine in about once every 5 years unless I just happened to be near a service center or met the techs at an event somewhere. Most often, they said the machine checked out fine, and all they did was update some software (I don't do online updates) reinforce the solder on some connections, and once or twice I had my printer replaced.

For most machines you have authorized service centers and the manufacturer to choose from for service. Many of the suppliers also do repair work.
_________________________
http://www.executiveclearance.com/beforeandafter.html
Setting a goal is not the main thing. It is deciding how you will go about achieving it and staying with that plan. --- Tom Landry
Has this site helped you? Pay it forward. Donate to keep HairTell & Hairfacts Online at http://www.hairfacts.com/feedback/support-this-site/

Top

Moderator:  Andrea 
Sponsored Links
Recent Posts
Apilus Xcell for SALE Mint condition!
by James W. Walker VII
12:20 PM
Lasting results
by Iluv2zap
11:44 AM
Recommended machine to buy in 2017?
by TheFlyingProbe
09:11 AM
Afraid of Laser Hair Stimulation
by purple potato
07:26 AM
is thermolysis safe on asian skin?
by geri
11/15/17 11:43 PM
Top Posters
LAgirl 9994
dfahey 9606
James W. Walker VII 8047
Andrea 4149
Michael Bono 3167
Who's Online
2 registered (LRN, Chicaaa), 103 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod